Skip to content
Ona API Reference
Ona Docs
API Reference
Prebuilds

UpdateWarmPool

prebuilds.update_warm_pool(PrebuildUpdateWarmPoolParams**kwargs) -> PrebuildUpdateWarmPoolResponse
POST/gitpod.v1.PrebuildService/UpdateWarmPool

Updates a warm pool’s configuration.

Use this method to change the desired pool size.

Examples

  • Update pool size:

    warmPoolId: "a1b2c3d4-5678-9abc-def0-1234567890ab"
desiredSize: 5
ParametersExpand Collapse
warm_pool_id: str

warm_pool_id specifies the warm pool to update

formatuuid
Deprecateddesired_size: Optional[int]

desired_size updates the number of warm instances to maintain. Deprecated: Use min_size and max_size instead for dynamic scaling.

formatint32
maximum20
minimum1
max_size: Optional[int]

max_size updates the maximum number of warm instances to maintain. The pool will never scale above this value. Must be >= min_size and <= 20.

formatint32
maximum20
minimum1
min_size: Optional[int]

min_size updates the minimum number of warm instances to maintain. The pool will never scale below this value. Must be >= 0 and <= max_size. Set to 0 to allow full scale-down.

formatint32
maximum20
ReturnsExpand Collapse
class PrebuildUpdateWarmPoolResponse: …
warm_pool: WarmPool

WarmPool maintains pre-created environment instances from a prebuild snapshot for near-instant environment startup. One warm pool exists per <project, environment_class> pair.

metadata: WarmPoolMetadata

metadata contains organizational and ownership information

created_at: datetime

created_at is when the warm pool was created

formatdate-time
updated_at: datetime

updated_at is when the warm pool was last updated

formatdate-time
environment_class_id: Optional[str]

environment_class_id is the environment class whose instances are warmed

formatuuid
organization_id: Optional[str]

organization_id is the ID of the organization that owns the warm pool

formatuuid
project_id: Optional[str]

project_id is the ID of the project this warm pool belongs to

formatuuid
runner_id: Optional[str]

runner_id is the runner that manages this warm pool. Derived from the environment class.

formatuuid
spec: WarmPoolSpec

spec contains the desired configuration for this warm pool

desired_phase: Optional[WarmPoolPhase]

desired_phase is the intended lifecycle phase for this warm pool. Managed by the API and reconciler.

One of the following:
"WARM_POOL_PHASE_UNSPECIFIED"
"WARM_POOL_PHASE_PENDING"
"WARM_POOL_PHASE_READY"
"WARM_POOL_PHASE_DEGRADED"
"WARM_POOL_PHASE_DELETING"
"WARM_POOL_PHASE_DELETED"
Deprecateddesired_size: Optional[int]

desired_size is the number of warm instances to maintain. Deprecated: Use min_size and max_size instead for dynamic scaling. Existing pools will be migrated to min_size=max_size=desired_size.

formatint32
maximum20
minimum1
max_size: Optional[int]

max_size is the maximum number of warm instances to maintain. The pool will never scale above this value. Must be >= min_size and <= 20.

formatint32
maximum20
minimum1
min_size: Optional[int]

min_size is the minimum number of warm instances to maintain. The pool will never scale below this value. Must be >= 0 and <= max_size. Set to 0 to allow full scale-down.

formatint32
maximum20
snapshot_id: Optional[str]

snapshot_id is the prebuild snapshot to warm up in the pool. Updated by the reconciler when a new prebuild completes for this project and environment class. Empty when no completed prebuild exists yet.

formatuuid
spec_version: Optional[str]

spec_version is incremented each time the spec is updated. Used for optimistic concurrency control.

status: WarmPoolStatus

status contains the current status reported by the runner

phase: WarmPoolPhase

phase is the current phase of the warm pool lifecycle

One of the following:
"WARM_POOL_PHASE_UNSPECIFIED"
"WARM_POOL_PHASE_PENDING"
"WARM_POOL_PHASE_READY"
"WARM_POOL_PHASE_DEGRADED"
"WARM_POOL_PHASE_DELETING"
"WARM_POOL_PHASE_DELETED"
desired_size: Optional[int]

desired_size is the current target number of instances the autoscaler has decided on. Unlike running_instances, this value is stable and does not fluctuate as instances are claimed and backfilled.

formatint32
failure_message: Optional[str]

failure_message contains details about why the warm pool is degraded or failed

running_instances: Optional[int]

running_instances is the number of running warm instances in the pool, ready to be claimed for near-instant environment startup.

formatint32
status_version: Optional[str]

status_version is incremented each time the status is updated. Used for optimistic concurrency control.

stopped_instances: Optional[int]

stopped_instances is the number of pre-provisioned but stopped instances in the pool. When a running instance is claimed, stopped instances are used to backfill the running pool faster than provisioning from scratch. Stopped instances only incur storage costs, allowing a larger total pool at lower cost than keeping all instances running.

formatint32
id: Optional[str]

id is the unique identifier for the warm pool

formatuuid

UpdateWarmPool

import os
from gitpod import Gitpod

client = Gitpod(
    bearer_token=os.environ.get("GITPOD_API_KEY"),  # This is the default and can be omitted
)
response = client.prebuilds.update_warm_pool(
    warm_pool_id="a1b2c3d4-5678-9abc-def0-1234567890ab",
    desired_size=5,
)
print(response.warm_pool)
{
  "warmPool": {
    "metadata": {
      "createdAt": "2019-12-27T18:11:19.117Z",
      "updatedAt": "2019-12-27T18:11:19.117Z",
      "environmentClassId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "organizationId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "projectId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "runnerId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e"
    },
    "spec": {
      "desiredPhase": "WARM_POOL_PHASE_UNSPECIFIED",
      "desiredSize": 1,
      "maxSize": 1,
      "minSize": 20,
      "snapshotId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "specVersion": "specVersion"
    },
    "status": {
      "phase": "WARM_POOL_PHASE_UNSPECIFIED",
      "desiredSize": 0,
      "failureMessage": "failureMessage",
      "runningInstances": 0,
      "statusVersion": "statusVersion",
      "stoppedInstances": 0
    },
    "id": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e"
  }
}
Returns Examples
{
  "warmPool": {
    "metadata": {
      "createdAt": "2019-12-27T18:11:19.117Z",
      "updatedAt": "2019-12-27T18:11:19.117Z",
      "environmentClassId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "organizationId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "projectId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "runnerId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e"
    },
    "spec": {
      "desiredPhase": "WARM_POOL_PHASE_UNSPECIFIED",
      "desiredSize": 1,
      "maxSize": 1,
      "minSize": 20,
      "snapshotId": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",
      "specVersion": "specVersion"
    },
    "status": {
      "phase": "WARM_POOL_PHASE_UNSPECIFIED",
      "desiredSize": 0,
      "failureMessage": "failureMessage",
      "runningInstances": 0,
      "statusVersion": "statusVersion",
      "stoppedInstances": 0
    },
    "id": "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e"
  }
}